corrugated carton machine production line
Whatapp (weichat): +86-13801968812
||LXC-1500H Hydraulic Mill Roll Stand
Control type: whole hydraulic type Characteristic
* Symmetry structure could install two bundles real paper at the same time, and change the paper without any stop.
* Adopt hydraulic drive that could make the real paper lift-lower, clamp and release and move.
* Adopt pneumatic strain to adjust the real paper.
* Expanding clips design.
* Tension control by pneumatic brake system, manual controlled and also can be controlled by splicer.
The maximum paper width: 2500MM.
* Pass the national pressure vessel inspection, and get a safe certification about national pressure vessel security;
* One is fixed, another one free to move, both of them are steel products.
* Warm-range adjustment adopts electric control.
* Power motor 1/2HP gear with a turbine and a drive arm with gear transmission.
* The preheated rollers are electrically rotating, with reducing motor and single ball bearing can set idle running with stable speed.
|LXC-320SN/360S Single Facer
Flute type: as per customer’s requirements, A/C/B/E/F etc;
Design-corrugating roller under pressure roller, helps lowering machine’s center and reducing shaking;
Inner suction structure of corrugating roller;
Separate transmission for gluing unit, its whole structure is movable, easy to clean and maintenance;
Inlet and outlet of steam is fixed joint.
Design speed:180/200 m/min
Corrugated roller made of CR-MO alloy steel No.48
|LXC-2B Single/Double Decks Feeding Bridge
Available width: 1400 – 2500 mm
* Adopt suction tension and its adjusting device, assure the sticking and stable paperboard pass by of the heating plate
* Motorized alignment adjustment, easy and swift
* Two set of operation panels, make easy adjustment up or down the bridge
* Synchronous motor driving, with high and low speed stacking device, to transport and stack the corrugated paperboard.
||“LXC-318D Glue Machine(High Speed)
|LXC-745N Steam-heating & Press-cooling System
LXC-745N-D Driving RollerTechnical specification:
1. Availbale width: 1400-2200mm
2. Design speed: 200m/minStructure characteristic:
1. Whole body is high strength channel steel, stable, beautiful, suitable for high speed machinery running.
2. Heating plate is made according to national container safety standard, of 600mm steel. Inside, S type construction will raise the steam usage efficiency. More welded rods will keep heating plate unchanged in shape.
3. Heating section is tense pressure roller structure, cardboard sticks firmly and levels off.
|LXC-250N NC Thin Blade Slitter Scorer
(LXC-160N 180N 200N 250N)
Blade configuration: 5 blades 8 scores(or according to customer’s requirement)
— AC servo motor by Mitsubishi of Japan;
-Computerized system can grind the blades automatically (without braking). Time and frequency of grinding can be self-set by customer according to working conditions
-Computer monitoring to guarantee synchronization with whole line
|LXC-150/180 Double Layer NC Cutoff with Rotary Blade